Rondelles originales Nord-Lock
Rondelles originales Nord-Lock
Nord-Lock a créé la technologie originale de l’effet de cames qui sécurise les assemblages boulonnés, même lorsqu’ils sont exposés à des vibrations et à des charges dynamiques élevées. Le système ne peut se desserer involontairement en raison de l’effet de cames créé sous la tête de vis ou sous l’écrou.
Nord-Lock Steel Washers |
||||
Applications | General steel applications | |||
Material standard | EN 1.7182 | |||
Size range | M3-M130 #5 to 5" |
|||
Corrosion resistance | Minimum 1,000 hours in salt spray test (according to ISO 9227) | |||
Hardening | Through hardened | |||
Washer hardness* | ≥ 465HV1 | |||
Coating | Delta Protekt® KL100 zinc flake coating | |||
Bolt grades | Up to 12.9 | |||
Temperature range*** | -50°C to 200°C | |||
Product designation | NL NLsp |
|||
Laser marking type code | flZn |
* Washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
*** Temperature recommendations are based on information from the raw material supplier and testing. The locking function is not affected within the specified range.
Nord-Lock Stainless Steel Washers |
||||
Applications | General stainless steel applications | |||
Material standard | EN 1.4404 | |||
Size range | M3-M80 #5 to 3 1/8" |
|||
Corrosion resistance | PREN 27** | |||
Hardening | Surface hardened | |||
Washer hardness* | ≥ 520HV0,05 | |||
Bolt grades | Up to A4-80 | |||
Temperature range*** | -160°C to 500°C | |||
Product designation | NLss NLspss |
|||
Laser marking type code | SS |
* In order to assure the unique mechanical locking function of the Nord-Lock washers, the hardness of the mating surfaces must be lower than the hardness of the Nord-Lock washers.
** PREN (Pitting Resistance Equivalent Number) = %Cr + 3,3x%Mo + 16x%N. Figures in table valid for base material.
*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.
Nord-Lock 254 SMO® Washers |
||||
Applications | Corrosive environment – chloride rich environments, offshore, pumps, heat exchangers, nuclear, food, medical, processing | |||
Material standard | EN 1.4547 | |||
Size range | M3-M39 #5 to 1 1/2" |
|||
Corrosion resistance | PREN 45** | |||
Hardening | Surface hardened | |||
Washer hardness* | ≥ 600HV0,05 | |||
Temperature range*** | -160°C to 500°C | |||
Product designation | NLss-254 NLspss-254 |
|||
Laser marking type code | 254 |
* In order to assure the unique mechanical locking function of the Nord-Lock washers, the hardness of the mating surfaces must be lower than the hardness of the Nord-Lock washers.
** PREN (Pitting Resistance Equivalent Number) = %Cr + 3,3x%Mo + 16x%N. Figures in table valid for base material.
*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.
Nord-Lock Alloy C-276 Washers |
||||
Applications | Acidic environment – chemical industry, evaporators, offshore, downhole tooling | |||
Material standard | EN 2.4819 or equivalent | |||
Size range | M4-M20 #8 to 1 1/2" |
|||
Corrosion resistance | PREN 68** | |||
Hardening | Surface hardened | |||
Washer hardness* | ≥ 520HV0,05 | |||
Temperature range*** | -160°C to 500°C | |||
Product designation | NLss-276 NLspss-276 |
|||
Laser marking type code | 276 |
* In order to assure the unique mechanical locking function of the Nord-Lock washers, the hardness of the mating surfaces must be lower than the hardness of the Nord-Lock washers.
** PREN (Pitting Resistance Equivalent Number) = %Cr + 3,3x%Mo + 16x%N. Figures in table valid for base material.
*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.
Nord-Lock Alloy 718 Washers |
||||
Applications | High temperatures – gas turbines, turbo charges, incinerators | |||
Material standard | EN 2.4668 or equivalent | |||
Size range | M4-M20 #5 to 1 1/2" |
|||
Corrosion resistance | PREN 29** | |||
Hardening | Surface hardened | |||
Washer hardness* | ≥ 620HV0,05 | |||
Temperature range*** | -160°C to 700°C | |||
Product designation | NLss-718 NLspss-718 |
|||
Laser marking type code | 718 |
* In order to assure the unique mechanical locking function of the Nord-Lock washers, the hardness of the mating surfaces must be lower than the hardness of the Nord-Lock washers.
** PREN (Pitting Resistance Equivalent Number) = %Cr + 3,3x%Mo + 16x%N. Figures in table valid for base material.
*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.
All types of Nord-Lock washers |
||||
Material type | ||||
Steel | Stainless steel (ss) |
254 SMO® | ALLOY C-276 |
ALLOY 718 |
Applications | ||||
General steel applications | General stainless steel applications | Corrosive environment – chloride rich environments, offshore, pumps, heat exchangers, nuclear, food, medical, processing | Acidic environment – chemical industry, evaporators, offshore, downhole tooling | High temperatures – gas turbines, turbo charges, incinerators |
Material standard | ||||
EN 1.7182 | EN 1.4404 | EN 1.4547 | EN 2.4819 or equivalent | EN 2.4668 or equivalent |
Size range | ||||
M3-M130 #5 to 5" |
M3-M80 #5 to 3 1/8" |
M3-M39 #5 to 1 1/2" |
M4-M20 #8 to 1 1/2" |
M4-M20 #5 to 1 1/2" |
Corrosion resistance | ||||
Minimum 1,000 hours in salt spray test (according to ISO 9227) | PREN 27** | PREN 45** | PREN 68** | PREN 29** |
Hardening | ||||
Through hardened | Surface hardened | Surface hardened | Surface hardened | Surface hardened |
Washer hardness* | ||||
≥ 465HV1 | ≥ 520HV0,05 | ≥ 600HV0,05 | ≥ 520HV0,05 | ≥ 620HV0,05 |
Coating | ||||
Delta Protekt® KL100 zinc flake coating | - | - | - | - |
Bolt grades | ||||
Up to 12.9 | Up to A4-80 | Up to A4-80 | Up to A4-80 | Up to A4-80 |
Temperature range*** | ||||
-50°C to 200°C | -160°C to 500°C | -160°C to 500°C | -160°C to 500°C | -160°C to 700°C |
Product designation | ||||
NL NLsp |
NLss NLspss |
NLss-254 NLspss-254 |
NLss-276 NLspss-276 |
NLss-718 NLspss-718 |
Laser marking type code | ||||
flZn | SS | 254 | 276 | 718 |
* In order to assure the unique mechanical locking function of the Nord-Lock washers, the hardness of the mating surfaces must be lower than the hardness of the Nord-Lock washers.
** PREN (Pitting Resistance Equivalent Number) = %Cr + 3,3x%Mo + 16x%N. Figures in table valid for base material.
*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.
Guide de sélection
Paramètres | ||||
Rondelles en acier au carbone |
Rondelles en acier inoxydable AISI 316L (ss) |
Rondelles en acier inoxydable 254 SMO® |
Rondelles en ALLOY C-276 |
Rondelles en ALLOY 718 |
Nuance d’acier | ||||
EN 1.7182 | EN 1.4404 | EN 1.4547 | EN 2.4819 ou équivalent | EN 2.4668 ou équivalent |
Exemples d’applications | ||||
Applications générales pour pièces en acier | Applications générales pour pièces en acier inoxydable. Ambiances non chlorées / non acides | Applications générales dans l’eau de mer, pompes, ambiances chlorées, échangeurs de chaleur, centrales nucléaires, désalinisation, industrie alimentaire, équipements médicaux | Applications en milieu acide, industrie chimique et de traitement, évaporateurs, outillage de forage (offshore) | Applications à haute température, turbines à gaz, turbos, incinérateurs |
Tailles disponibles | ||||
M3-M130 #5 - 5" |
M3-M80 #5 - 3 1/8" |
M3-M39 #5 - 1 1/2" |
M3-M39 disponible sur demande #5 - 1 1/2" disponible sur demande |
M3-M39 disponible sur demande #5 - 1 1/2" disponible sur demande |
Types de rondelles | ||||
Série standard (étroite)(NL3 - NL130) Série large (NL3,5sp - NL36sp) |
Série standard (étroite)(NL3ss - NL80ss) Série large (NL3,5spss - NL30spss) |
Série standard (étroite)(NL3ss-254 - NL39ss-254) Série large (NL3,5spss-254 - NL27spss-254) |
Série standard (étroite)(NL3ss-276 - NL39ss-276) Série large (NL3,5spss-276 - NL27spss-276) |
Série standard (étroite)(NL3ss-718 - NL39ss-718) Série large (NL3,5spss-718 - NL27spss-718) |
Traitement thermique / Revêtement | ||||
Durcissement à cœur Revêtement Delta Protekt® (KL100) et finition (VH302GZ) | Durcissement en surface | Durcissement en surface | Durcissement en surface | Durcissement en surface |
Dureté de rondelle* | ||||
≥ 465HV1 | ≥ 520HV0,05 | ≥ 600HV0,05 | ≥ 520HV0,05 | ≥ 620HV0,05 |
Résistance à la corrosion | ||||
Minimum 1,000 heures au brouillard salin (essai selon norme IS09227) | PREN 27** | PREN 45** | PREN 68** | PREN 29** |
Classes de visserie | ||||
Jusqu’à la classe 12.9 | Jusqu’à la classe A4-80 | |||
Plage de température*** | ||||
-50°C à 200°C | -160°C à 500°C | -160°C à 500°C | -160°C à 500°C | -160°C à 700°C |
* Pour assurer la fonction unique de blocage des rondelles Nord-Lock, la dureté des pièces en contact doit être inférieure à celle des rondelles Nord-Lock (voir table ci-dessus).
** PREN (Pitting Resistance Equivalent Number) = %Cr + 3,3x%Mo + 16x%N. Les chiffres figurant dans le tableau sont valables pour les matériaux de base.
*** Recommandations de température basées sur les informations du fournisseur de la matière première. Dans la plage de température requise, la fonction de blocage n’est pas affectée.
Dureté de la rondelle
Afin d’assurer la fonction unique de verrouillage avec effet de came des rondelles Nord-Lock, la dureté des surfaces en contact ne doit pas dépasser celle des rondelles Nord-Lock.
Type de rondelle | Gamme | Revêtu de zinc lamellaire flZnnc – 600 | Non revêtu |
Rondelles en acier au carbone (Durcissement à coeur) | NL3 - NL42 NL45 - NL130 |
≥ 465 HV1 ≥ 465 HV1 |
|
Rondelles en acier inoxydable AISI 316L (ss) (Durcissement en surface) | NL3ss - NL80ss | ≥ 520 HV0.05 | |
Rondelles en acier inoxydable 254 SMO® | NL3ss-254 - NL80ss-254 | ≥ 600 HV0.05 |
Table de conversion des duretés
Vickers HV |
Brinell HB |
Rockwell HRC |
Rockwell HRA |
8.8 bolt |
10.9 bolt |
12.9 bolt |
300 | 285 | 29,8 | 65,5 | | | ||
310 | 295 | 31,0 | 65,8 | | | ||
320 | 304 | 32,2 | 66,4 | | | 320 HV | |
330 | 314 | 33,3 | 67,0 | | | | | |
335 | 319 | 33,9 | 67,3 | 335 HV | | | |
340 | 325 | 34,4 | 67,6 | | | ||
350 | 333 | 35,5 | 68,1 | | | ||
360 | 342 | 36,6 | 68,7 | | | ||
370 | 352 | 37,7 | 69,2 | | | ||
380 | 361 | 38,8 | 69,8 | 380 HV | ||
385 | 366 | 39,3 | 70,1 | 385 HV | ||
390 | 371 | 39,8 | 70,3 | | | ||
400 | 380 | 40,8 | 70,8 | | | ||
410 | 390 | 41,8 | 71,4 | | | ||
420 | 399 | 42,7 | 71,8 | | | ||
430 | 409 | 43,6 | 72,3 | | | ||
435 | 414 | 44,1 | 72,5 | 435 HV | ||
440 | 418 | 44,5 | 72,8 | |||
460 | 437 | 46,1 | 73,6 | |||
480 | (456) | 47,7 | 74,5 | |||
500 | (475) | 49,1 | 75,3 | |||
520 | (494) | 50,5 | 76,1 | |||
540 | (513) | 51,7 | 76,7 |
Achetez les rondelles Nord-lock en ligne
Les rondelles Nord-lock sont maintenant disponibles en blister. Sélectionnez les rondelles dont vous avez besoin !