钢结构垫圈

洛帝牢发明了原创楔形制锁技术,即使在经受剧烈震动和动态负载的情况下,也可以紧固螺栓连接。 由于在螺栓头和螺母下方形成楔形,我们的产品不可能意外松动。

Joint Guide

Nord-Lock SC-washers can be used with HV / HR bolts and nuts.

Through-holes
Through-holes require the use of two pairs of Nord-Lock SC-washers. One pair for securing the bolt and a second pair for securing the nut. Turn both fasteners in order to close the cams on both washer pairs before tightening to minimize settlements. Keep the bolt secure whilst tightening the nut.

Designs where Nord-Lock SC-washers are not recommended:

  • With chamfered plain washers.
  • Mating surfaces that are not locked in place.
  • Mating surfaces harder than the washers.
  • Extremely soft mating surfaces (e.g. wood, plastic).
  • Applications with extremely large settlements.

Torque Guidelines

Please note that the torque guidelines below are valid for HV bolts only.

Washer size

 

Reduce preload force
F (P, C, NL*)
[kN]

Modified torque method
Torque moment
M (A, L)
[Nm]

Modified combined method* (torque + angle)
Pre-torque moment
M (A, MKV, NL
[Nm]

NL12SC 45 130 100
NL16SC 90 330 250
NL20SC 145 660 490
NL22SC 170 850 640
NL24SC 200 1100 825
NL27SC 260 1600 1220
NL30SC 315 2150 1650
NL36SC 460 3750 2800
*Torque conditions are specified in the ETA-13/0246 for HV bolts, grade 10.9

Tightening Angles

t < 2d 45° 1/8
2d ≤ t < 6d 60° 1/8
6d ≤ t ≤ 10d 90° 1/4
10d < t No recommendations
*Tightening angles when using the combined method varies depending on the clamp length, t, in relation to bolt diameter, d.

与我们取得联系

如需了解更多关于我们如何处理您的具体联系信息,请参阅我们的隐私条款

感谢您与我们联系!